if anyone has a question on this product or my setup just ask.
Printable View
if anyone has a question on this product or my setup just ask.
this is my buildup accept i have iron ported heads,440,.030,wiseco pistons,h beam rods,milodon oiling,2x850cfm holleys,mallery 140gph pump,regulator,MSD distrebutor at 28 deg total,7al box@6800chip,mvb 727,PTC convertor3500rpm,4.10,28"tire,top end in the 1/4 is 6100@124,5lbs of boost,4000lb car.
i have the pistons clean and the block n heads desiliconed,the cam came out without pulling the grill[that is awsome!]i will be putting it all back in the next 2 weeks.[yes i work slow but do a good job.]i can't wait to try the new cam,.540 lift@252,113LSA.
That's a big cam!! Should work great with the 440 and the big huffer.
i forgot!here is the build on speed tv.i picked my combo befor i saw the show and found the link to the parts.
http://moparmusclemagazine.com/techa...yno/index.html
here is my next addition to the block to make it live for 14lbs next year, along with some hard bloch 1/2 fill.http://gearsandrears.com/girdle.html
i have made some good progress this weekend!she is almost ready to start and breakin the new cam with one spring out for breakin.just coolant,top off oil, check for leaks,i think she is ready.
i got the came broken in!THE BAD NEWS!the rockers came loose and bent 8 pushrods.THE GOOD NEWS!i pulled the blower and the cam still looks good.a new pack of pushrods and a couple roller rockers from harland sharp 30 minutes away.i think she can go back togather.
yep i got her back togather and running,i ran her for another 15 minutes to be sure thhe cam was brokein.i need to put the inner springs back in an i am back in business.i will post a time in a few weeks.i am looking for 10.50's.i am moving so that is why i have to wait to run.Quote:
Originally Posted by blownzoom440
So hows the car running? I have a 8-71 on my 408w and have just gotten it started. I am trying to get the thing to run a little better now but haven trouble with the carbs. Im using holley 750's and i think i need to jet it down a little. Where do you have your timing set at?
set at 32 w/8lbs,110 citco fuel.92/90 jets no power valves.
i tuned the car at the track yesterday with a 11.04@122 after some tach interferance issues.i need some clean plugs for the next time out to read better.i think i can add some timming and fuel still.the batteries died in my egt so next time i will have more info.
with further inspection of the boost guage i had 3 lbs so i got a new guage and the same result.the hp is there for 8lbs but not the boost psi.i flipped the pulleys for more psi and got 6 to 7 lbs when i stab the gas with the breaks on to 3000rpm.i added some fuel,clean plugs,batteries in the egt so i am ready for next weekend at dragway 42 in west salem OH.
ok with 8lbs guage boost,32 deg timming i went.
10.72 @126mph,1.52 60',100.2 mph 1/8 mile6.83 1/8 mile
not bad for a 4200lb car!!
here is a pic of the car launching,not bad!
http://www.reillymotorsports.com/gal...40/Jul2812.JPG
http://www.reillymotorsports.com/gal...40/Jul2812.JPG