New Novi 1000 Partial Install !!HERE!!

Here is a picture of the new Novi 1000 Installed in my Car.

There really isn't much left to finish installing it, but I need to find out how to hook the stock tensioner to the bracket. Make a custom bracket for the alternator etc, tap oil pan etc... few little things

Mark

http://www.novipower.com/photopost/d...nder_hood1.jpg

Some tips..

Ian

Hey Ian. Do you have to make a alternator bracket? You've got me worried! :eek:

Thanks Ian, but I know I will need to dissconnect the hose from the throttle body "I read that in here, it will blow it out". Now the tensioner I still don't know how it bolts up. The stock bracket is huge and someone said it is square "which it's not". The bolt is huge and there is no other bolts to it. So how do I hook it up???

Thanks
Mark

regattacoupe: The alternator bolts to the main bracket - no custom pieces needed.

Mark: I have not seen the kit in person so I cannot say for sure, but have a look at this NOVI 2K setup (it should be close)

http://www.novipower.com/photopost/d...aser-2-med.jpg

Ian

Thanks for usin my pic Ian :D

LOL no problem :p

Ian

I have no heater or smog setup. I am almost finished because I can bypass two steps right there! Hehe ;)

Only have to tap the pan and install the oil lines and we're in business! :)

the bracket for the tensioner is square, with an ear on the bottom right that bolts on the stud on the water pump. The bracket has two holes on the left (top and bottom), one in the middle for the stock tensioner, and the aft mentioned stud hole. The bracket mounts behind the two left most upper holes in the blower plate.

Coupe: would u be able to get a picture? I'll get a picture of my old bracket it doesn't sound at all like the one you have. Mine was a big bracket that was hooked to the head.

Mark

I have whats in the first picture up top. Your kit is supposed to have the small bracket I am talking about. I dont have a camera so no pics, sorry.

hey ian that picture of the novi2000 car has the throttle body hose hooked up still lol

Mike, yes, my car had the hose still on...when I took the pic, I had a wierd situation where I had low vacuum without that there, so I had it on. I have since taken that off and corrected the problem.

Did not even notice, good eye :D

Ian