I have a set of 56 pound low impedance injectors with my PMS, should I install them with the PMS or just leave the 36ers. Would there be any advantages........? Disadvantages.........?
Printable View
I have a set of 56 pound low impedance injectors with my PMS, should I install them with the PMS or just leave the 36ers. Would there be any advantages........? Disadvantages.........?
i would run them,but what are u running for fuel system?aftermarket fuel system ?rails, lines,pump etc...you wouldnt get
much avantage with stock fuel rails lines in tank pump?
anything over 50 lbs is generally low impedence unless specified otherwise. you will need the low inpedence driver which is another 200-300
Yea without rails those big injectors will suck your stock rails dry. Untill you get a good fuel system I would stick with the 36s. I'm about to start the install of my fuel system with some 55lb injectors. I already have my low impedence driver here ready to get wired up.
Troy
I hear someone is making 55lb injectors that are high impedance and works with your stock computer.
I have a low impedance driver . I was running stock rails, 255 in tank, and rail mount(t-rex style) pump(actually the external pump didn't change anything it just taxed my charging system and made noise,I bought it used.. I do have vortech rails though that I just need some fittings for. Sitting in the shop.
Yea sieman deka has some 55lb high impedence injectors. I just think low impedence injectors are easier to control. Acceleronics also have a low impedence driver for guys using a stock EEC.Quote:
Originally posted by Brcuda
I hear someone is making 55lb injectors that are high impedance and works with your stock computer.
Troy