I,m thinking of going with a 8 inch crank pulley on my S trim.I was just wondering how much boost I would see with a 3.33 or 2.95 blower pulley also have a ANDERSON power pipe.and do you think 42# injector's will be enough? Thanks
Printable View
I,m thinking of going with a 8 inch crank pulley on my S trim.I was just wondering how much boost I would see with a 3.33 or 2.95 blower pulley also have a ANDERSON power pipe.and do you think 42# injector's will be enough? Thanks
Rdrnnr, posted that he saw 18 psi with the 8" crank and the 3.33" pulley so hold on tight!! you might need an FMU for that wild setup or not.........it's hard to tell......
could you give me some kinda starting point as for as the fuel pressure and maybe timing.I will be runnig 100 octane.I have an old school Crane Interceptor 2 if that helps.Thank you for your help.Quote:
Originally Posted by regattacoupe
You should probably step up to 50 lb injectors. Start with the fuel pressure at 38-40 with the vac line off. Start the timing with 10 degrees base.