-
Help: Braided Oil Return
Does anybody know of anyone selling a braided oil return set up?
Basically, I am using 1/2 inch heater hose at the moment and it is prone to leaking where it is clamped off on either end. Whatever the solution, I wouldn't care if it was braided line or not. I just want to fix this oil leaking problem.
-
I'm not sure if a -8an or -10an would do the trick or not but you only need 3 feet of course.
-
Just make your own, get the NPT to #8 AN fiittings, I used a straight fitting under the blower and a 45 degree fitting at the pan. You'll need about 3 feet of #8 line and build it yourself.
-
Take your ends and piece of hose in to a good parts store and have them make you a hydraulic line with crimped on ends. That's what I'm using on mine and it doesn't leak at all...