Please let me know what you need. We have many styles and sizes in stock. We can make just about any pulley in any size!
Ian
Printable View
Please let me know what you need. We have many styles and sizes in stock. We can make just about any pulley in any size!
Ian
I need one for the procharger P600B 8 rib but it has to be 3in. its the tension pullie. how much?
What size pulley would you suggest for an ATI P1sc in order to run 14lbs-16lbs of boost? I currently have the 10lb pulley supplied by ATI and was also wondering if it's a 8 rib pulley? Do you make one that would replace the ATI pulley in the same configuration. Would I need a smaller belt? thanks :)
Hey Ian, how about 50mm cog pulleys?
Ok, I'm ready to buy and I would like a 3" pulley for the P1sc that would replace the 10lb pulley I have now. Let me know so that I can purchase it. thanks
I need ribbed crank pulley to fit 460 Ford for Procharger D-1. I also wondered if you know of a bracket that mounts this unit and what blower pulley sizes and prices are. Thanks, Mike
Hotrodvdog: I got your order, and will get working on it this week.
HHStang: At this time, I do not make crank pulleys, nor do I have brackets for the 460's.
Thanks,
I JUST BOUGHT A 90 COUPE WITH A CARBED 351W WITH NEW D1SC PROCHARGER KIT , CAME WITH THE 15LBS PULLEY. I WANT TO BRING BOOST DOWN TO ABOUT 10LBS.
WHAT SIZE ? HOW MUCH ?
THANKS , TIM
Quote:
Originally Posted by Ian
I need a 12 rib setup for my LT1 P1SC kit and a tensioner if i need that(i have the 8 rib, dont know if its wide enough)
looking for a 2.439 ratio pullys (times 4.10 step up x 6000 RPM = 60,000 blower RPM)
Please give a price for the entire 12 rib set up
AND
Price for just a 3.10'' to 3.20'' 8 rib pully if you can make that.
THANX
have any 10 rib pulleys for the N2K yet?
How about a 6lb pulley for a Powerdyne?? What would that cost? Thanks!
Looking for 10-12psi out of my P1SC, right now i have a 4.25" pulley on my 347 saleen, what size would i need? i was thinking it would be around 3", let me know what size i need and how much it would be. i have cash waiting!!
Keith
I'm looking for a 3.50" 8 rib Vortech blower pulley for an S trim on a 90 Mustang. Do you have anything like this or can you make it?
Thanks John
i talked to procharger and they tell me i need a 3.55" pulley, so let me know how much a 8 rib 3.55" pulley for a p1sc would be. Thanks email me at gibson_lp_ks@hotmail.com
Keith
90 saleen
Have any of the Novi 1000 single belt guys requested a complete 8-rib conversion setup yet? I realize the a/c is probably a goner, but seems the H2O, alt, and crank pullies would be doable.