Pumps mounted to Far from tank

I have had mixed reviews...wada think

http://www.mustangmods.com/data/2166/dsc02154.jpg

I dunno. I have never seen anyone mount the pumps that far away. I personally would feel better with them closer to the tank especailly if your using a pick up and not a sump.

I talked to MMR who i imaged my setup from and they said it was just fine as the hp 255s are serious "suckers"
I ran it this way because I wanted to plumb the line on the pass. side and wanted it to be as striaght as possible shot under the car up to the rails.
If i woulda mounted to the backside of the tank (so the pumps were close) I woulda had to play loopty loop with my feed line to get it back where I wanted it, which was too many bends for my likings.

After talking to a few "exp" companies/racers I am still getting the some say YEAH, some say I dunno.
Its def better than what I had before (stock) and only plan to run 550-600rw, so I dunno.
Another worry is supplyin press to the 60lb injs with these pumps and the -10 feed...hope its ok.

Chris

i run a simliar set up I am about the same distance and I have 0 problems with mine.

Awesome thanks

What size feed/injs?
The same pumps?