i wonder if it would be worth any power to switch from trick flow upper to the new box style trick flow upper and from my 75 mm throttle body to a 90mm.
Printable View
i wonder if it would be worth any power to switch from trick flow upper to the new box style trick flow upper and from my 75 mm throttle body to a 90mm.
I think a taller MT DR is more worth the $$ at this point. LOL :teeth:
whats MT DR?
The 28" tall Mickey Thomson Drag Radial. They should help you get to the end of the track before your rev limiter. Plus get your 60' down in the 1.4x's. Plus with your power get you in the single digit club. You will need a 15" rim however.
I will be running these this year as well.
oh haha...i get it.....wel that run was 2 years ago....i still had hydraulic roller cam and stuff and was redlining probably 6300 ish....now i have the shaft mount rockers and solid roller, some different porting so i am twisting it 7200 now....and i'm planning on buying M&H racemaster 275-50-17 drag radial(28") rod-06r i believe. that way i can still run my 17's.i have 3.27 's in the rear. i ran 4 10.66-10.80 runs leaving off idle(i don't know why i got a trans brake)after driving from the northern most town in Maine to Norwalk Ohio (1200 miles) with no overdrive and then back.
Well, then it is time to get some new numbers and update that sig. :p
"Get Er' Done."
Yeah, but i need to fix my cooling system problem, transmission oil leak, blower belt problems first. I really don't think i can afford to take it out this year. :(
That SUCKS.
yeah, so i have to watch the video of the 4 runs i made at Norwalk and the chassis dyno footage while it was being tuned :(
Well post'm up!Quote:
Originally Posted by mainestreetking
BTW I do think the box upper would better suite your combo. There's a guy on corral with a N/A 393 and he got one of the first ones out and I don't remember the number he made but I do remember It was a substansial improvement. I bought mine one month before they unvieled it. :weird:
by the way what psi radiator cap do you guys run @ this power level.i need to start figuring how to keep mine cool and keep it from blowing coolantall over the side of my car
i'd love to post them but they are off older style video tape.....how would i get that onto my comp?
I'm not sure. I don't have alot of computer savy. I run a 16 psi cap if i'm not mistaken.Quote:
Originally Posted by mainestreetking
16psi as well.
hmm...16 psi......isn't that stock? i think my engine builder put a 27psi cap on mine....something alot higher than stock anyway