have linclon mark vii ,,ys trim, fast system, areomotive fuel system ,estimate 720 rwhp , question is what size injectors? i am thinking 83#'s with elimator pump mabye 2?:rolleyes: :(
Printable View
have linclon mark vii ,,ys trim, fast system, areomotive fuel system ,estimate 720 rwhp , question is what size injectors? i am thinking 83#'s with elimator pump mabye 2?:rolleyes: :(
You might as well go for the big 150's, and leave yourself room to grow. The FAST can handle them. Get a Weldon pump and be done w/ the fuel system. Play it on the safe side, buy everything just once.
You are in the same boat I am in. I also have the areomotive fuel system, with the Eliminator fuel pump. This pump is suppose to be able to handle up to 900 hp forced induction. But, what I am hearing is it will not be enough fuel. The Weldon 2025 is suppose to be a better choice, or go with two Eliminator pumps.
My combo is a 393 with a YS-trim. I bought 83 lb Deka Seiman injectors which should be enough.
JHenke
thanks for your input thats how i like to do thing once.
Brcuda
thanks i will keep in mind ,what are you using for engine managment? because i saw pro m injector driver for $175 on ebay.
I bought a PMS with the low impedance driver last year in a group purchase.
I made over 800RW and have run 8.90s with a Weldon 2025 and SD 83lb injectors.
I have been watching that one too :eek:Quote:
Originally posted by blownmarkvii
because i saw pro m injector driver for $175 on ebay.
RdRunnr
did you see pms for 500 buy now?
item# 2403035639
I've made 781 rwhp with an aeromotive eliminator fuel pump and 83# injectors.
I am glad to hear I am not too far off. Thanks for your input.Quote:
Originally posted by Andrew
I've made 781 rwhp with an aeromotive eliminator fuel pump and 83# injectors.
can any one point me in right direction? how do yo make a start
up program or can you order one from f.a.s.t.?
Call Job Spetter @ Turbo People. 914-478-1727
Agree with Jim, get somebody reputable with the system to get you started and close. The system is not that complicated, but when you first start with it, you will need help. ALong with Job, In your area would be Dale Cherry from Berrel Automotive and Second Street SPeed, all three very reputable tuners and close enough that you wouldnt have to travel to aweful far.
thanks Spence,
i will have to look up those guy i greatful for the help.
thanks