I'm building a blown 383 sbc with 14mm cogs and set up for 10-12 psi - I'm going with mechanical fuel injection. I'm doing this as cash is available so its going to take a while. I'll provide pics when avail!
Printable View
I'm building a blown 383 sbc with 14mm cogs and set up for 10-12 psi - I'm going with mechanical fuel injection. I'm doing this as cash is available so its going to take a while. I'll provide pics when avail!
Very cool, sounds like a fun project.
the more blower motors the better.it will be great to have pics with it.i hope the injection gose well for ya.is it a teflon stripped blower?gas or alky?
It's a gas set up, cast rotors with teflon strips. Don Hampton said it's a pretty serious blower. It's still up in the air for the mechanical injection since I want to run it on the street. I've heard it can be a pain from some and others say it's (MFI) doable and will run OK. As long as I can get some sort of part throttle response and it doesn't wash out the cylinder walls or don't have to rebuild the cam mounted fuel pump every week I should be OK. If not I'll go with carbs. The build up is going to take a while, I'm in no rush and this is all for fun. Now how do I explain the blower to my wife...
Anyway,blownzoom440 I may be asking you questions in the near future!
CYA
Alex
dont wait too long to ask as the more you learn the better sooner than later.i race for fun about 10/15 times a yr.
here is some good info on blower care,breakin.prizm lube for the teflon.
http://www.insidetopalcohol.com/foru...ead.php?t=7857