Printable View
Dear....
I have Weiand 174 18psi......i use it on 351W..418ci with custom cam, custom carb from carb shop, heads 225cc same AFR 225cc
I tested the car on dyno i take just 402hp :confused::confused:... i dont know what is the problem.....some body said the blower is small for this engine????? is it true
Quote:
Originally Posted by haitham_c6
Car should make that with out the blower. You need to find out how much cfm the blower is capable of supporting efficiently.
With a 418 and afr 225s I would suggest a blower with a minimum of 1400 cfm.
To answer your question, a 175 sounds very small and as far as roots type blower I would tend to think a 871 would suit you better
Ok...
You mean i shuld to chang the blower ????....I'm going between a supercharg like procharger and turbo charg.....do you have Information about that, wich one is better and whay.....
Thanks
If you look at a super chager again, the Vortech YSI is hard to beat.
After having a supercharged car for a while now and if I had to do it all over again I wish I would of went the route of a turbo. Playing with constant belt tension and pulley ratios gets old after a while.
Plus with the turbo, if everything is set up correctly it will actually be easier on the crank and rods than a supercharger would be. They also usually make more power than a supercharger would.
If you look at a turbo your porbably going to want a 88mm at minimum if you go with a single. I suggest you contact this place http://www.supernaturalturbo.com/ for more information
Ok....
I'm looking to go to the turbo...but i want ask you about the best....with carb or injectors???
Hi dear....
Thank you to contact with me .....I have many questions about the turbo..becouse this is first time to use the turbo ...
I see many turbos but there is big different about the price ...maybe is bad brand...but how can i know that.....i see on ebay like this :
http://cgi.ebay.com/ebaymotors/1986-...item1e5bdd53ff
Something doesn't add up. Are you sure you got 18 PSI? I didn't think a 174 can produce 18 PSI on a 400 plus cubic inch engine with those heads unless you have way to small a cam. (or you're spinning it so fast it's heating the air up causing a false boost reading) What amount of overdrive do you have it pulleyed at? What is your compression ratio?
Are you currently swapping to a turbo or it's a futur plan?Quote:
Originally Posted by mrtbolt64
Quote:
Originally Posted by Sponge
Kind of happy where I am at but if I ever get the extra cash to throw away or need to step up power.........there will be a turbo on it
At 6000rpm, with your pulleys ratio, the blower is spinning at 13533rpm and the theorical boost should be 9.32psi.
now i want go to turbo or procharger....i want the best
A procharger is probably easier to install and will give you plenty hp.Quote:
Originally Posted by haitham_c6
A turbo (single or twin) needs a lot of piping
I would say it depends what kind of car do you have?
i have 99 mustang