Printable View
Can anyone provide some help in installing this. I cut back like it said but right behide the metal about a inch is a square box that is part of the headlight assemby I assume with a wire going to the turn signal socket. Super charger tubing is touching on the right side of hole and sitting about a 3/4 of an inch from the bottom. HELP, I really want this to work to get rid of prochargers setup or lake of! :mad:
I'm really not sure what you are talking about, I have a 96 with the WMS ,can you post a pic of the hole you are trying to cut?Are you cutting on the left or right of the original fenderwell hole? I cut mine on the left side at first and trimmed the right side to get everything to fit in nice and snug.Just using a saw blade to cut and bend back the metal at first.
I'am cutting on the left side of the hole, unable to cut towards the right due to a black electronics box inside fender wall a 1/4 inch from edge? maybe ingnition, this has the coil pack on the spark plug wire
When you installed the WMS pipe on your 96, did you have to remove the air pump to get it to fit? On mine the air filter would have to go right where the pump is now mounted on the ATI bracket.
Did you get it in yet? I can email you some pics if you want. It was a beeyutch to get in though. :eek:Quote:
Originally Posted by chevykiller
Quote:
Originally Posted by desertsnake
The pics would be great, thanks email paynegt@earthlink.net
Here you go. I took off the front bumper to ease the install. I also had to extend the MAF wires. Like I said, a real beeatch! :DQuote:
Originally Posted by chevykiller
http://img.villagephotos.com/p/2004-...Untitled-1.jpg
http://img.villagephotos.com/p/2004-...Untitled-2.jpg
http://img.villagephotos.com/p/2004-...Untitled-3.jpg
http://img.villagephotos.com/p/2004-...Untitled-4.jpg
http://img.villagephotos.com/p/2004-...Untitled-5.jpg