Any cam suggestions for a 363 ysi?
Stage 3 tea twisted wedge heads, r intake, c4 trans, 1 5/8 headers, street driven.
Thanks for any help!
Printable View
Any cam suggestions for a 363 ysi?
Stage 3 tea twisted wedge heads, r intake, c4 trans, 1 5/8 headers, street driven.
Thanks for any help!
Use a smaller than stock one for lots of torque!!!! :laugh:
What are you going to put in it? hyd roller? Solid/solid roller?Quote:
Originally Posted by BOSS LX363
Hyd roller
Well you don't need anything real big because you mentioned street driving. What converter are you going to run? Comp has some really good extreme energy/blower cams right now for hyd roller. I reccomend something 232-236@.050 on the intake side with a 112-114* lobe sep.Quote:
Originally Posted by BOSS LX363
Other than those I highly reccomend getting a custom grind for such a wild combo.
You should talk to jay allen since you are goin with trick flow heads. Have a custom cam done would be your best bet. Are you using 1 5/8s shorties? I think those would be a little restrictive.
1 5/8 Bassani long tubes into 3" dumps.
I plan on doing a custom cam, but just wanted to know the general size.
Ok well give jay a call or email him. He will get you exactly where you want to be. Here is his website. www.camshaftinnovations.com Here is how it says to contact him on his site.
To contact Cam Master Jay, please call 734.730.2574 from 9am-7pm or e-mail him at jayallen@comcast.net
I'd guess something around 230 in/240 ex @ .050", 114* -ish LSA. As mentioned, contact Jay, Ed C, Cam Motion, etc for a custom for that monster.
BTW, nice numbers from your 306 S-trim set up, what's the combo there?
306. stage 1 twisted wedge heads, trick flow stage 2 cam, tsi aod, pms, track heat intake, 14 lbs of boost.
I would call Jay I will be soon!