sorry if this is a repost POST UP SOME ENGINE PICS OF YOUR engin

???????????????

http://superchargerhelp.com/attachme...achmentid=1095


http://superchargerhelp.com/attachme...achmentid=1096

here ya go

http://www.superchargerhelp.com/phot...1W_004-med.jpg

Very nice! is that a 302 based engine or 351?

http://93gt.com/93GTPics/WP3.jpg
http://93gt.com/93GTPics/WP2.jpg

soon changing to RPM II intake, 10 rib set up, and the SCH bracket.

wee

Its a 351W. I had to sell the upper intake tho and get the regular R upper because I would have needed 5 inches of hood clearance. I really wanted to keep that intake.

Here's what it looked like last time it was together :D

http://www.superchargerhelp.com/phot...re_014-med.jpg

Here's a couple of my slow turd :teeth:

http://www.gotstang.com/0305/MachGT/P4060001.JPG

http://www.gotstang.com/0305/MachGT/P4150004.JPG


http://www.gotstang.com/0305/MachGT/P4150003.JPG

http://www.superchargerhelp.com/phot..._Bay_U-med.jpg

Here is how it looked last summer. I will upload a new shoot in a day or so. I redid the engine bay (filled everything) and have no more wires in there except for the engine harness.

Quote:

---

Originally Posted by Chuck

here ya go

http://www.superchargerhelp.com/phot...1W_004-med.jpg

---

that is SWEET!!!! I love the black valve covers with the black intake :cool:

blownby post of some of those close up shots of your engine bay the sides and the firewall close ups on all 3 if you can tryin to clean mine up real good want to see how you got it ,if you relocated them post up where you got them relocated anyone else that did this post up the close shots thx

Will do. But basically what wires where needed up front where ran in the fenders above the splash sheilds. Driver side had all the head light stuff. The pass side had mass air meter. And the engine harness came out of the heater core boot. I filled the holes where the original harnesses came out of the firewall on both sides. What ever other wires stayed in the car somewhere. I also redid the brakes lines which you'll see in the picture. I ran ss lines to cowl and ss rigid line in cowl then to the front passenger and rear from there.

You'll see. i will try to get them tonight.

I guess I have this for now. Notice the AN bulkheads on the firewall for the brake line. Also the only wires you see are the ones for the harness. The hole on the driver side is where my coil will mount and the hole on the pass side is for the power pipe. So clean like this.

I will get the completed version uploaded here as well.

http://www.superchargerhelp.com/atta...achmentid=1120

if i take some pics of some lines and stuff can you tell me if this can be totally taken out cause it seems like some stuff u can just take off somewhere u know what i mean?

When you say lines do you mean wires. I can try and help. I don't claim to be the wiring expert but have done a lot of rewiring since my dash was pulled out and wanted to get rid of all the junk in the engine bay.