Printable View
what will it take to get 9-10 psi from it? tell me what pullies ect.,also i dont want to use the fmu so what inj. do i need? i also want a power pipe for it. i have 4.10 rear now what gear should i go to 3.55 or 3.73? also my car runs 13.00's on motor now what time can i get with the 1000?
Are you doing this on stock heads?
yes the heads are stock, the motor has a b cam ,gt-40 intake and 1.7 rockers and the rest are bolt ons and also i dont have p/s or a/c how would i go about routing the belt?
also what size mass air meter do i need?
With stock heads boost is easy. I would leave the stock pulley on the blower and run a 7 or 7.5" ASP custom built pulley for the crank. You can use the march AC eliminator bracket to set up a pulley on but eliminate the spring loaded portion of the idler.
I have not put much thought into it but you may also be able to switch over to a standard rotation water pump. If that would work it would be a super clean install.
Quote:
Originally posted by kwik kx
also what size mass air meter do i need?
A 75mm unit is more than enough for your application.