Technical Service Bulletin

I just got a technical service bulletin in the mail from Procharger. it reads:
Inspect the high pressure FMU line (located between FMU and fuel rail) for hose specification. If hose is identified as 30R9 and/or fuel injection hose, hose is acceptable and no further action is required.
If hose is identified as 30R7 or cannot be identified, see remedy/ repair procedure below.

Basically remove and replace if you have a 30R7 line. contact ATI and they will send you out a new one.

Mine is one of the bad ones, and will be calling them for a replacement shortly. Just try ing to help out. Ken

Thanks for the update man. Thats good to know for those that didn't buy the blower new and won't get the bulletin.

Thanks for letting everyone know.

Ian

Good post info. I won't be using my FMU, but I will have the guy that I just sold it to check it out... he's a friend of mine and his car is at least a few weeks out from being done, so it isn't a big deal, but I will definitely check with him on that.

My replacement just came in a few days ago.

Chad