Printable View
i am about to buy a used Novi 2000 from a friend...i need to know what i need to go along with this blower, here is my setup
tfs Tw heads
tfs track heat intake
f cam
255 pump
and all the other bolt ons
right now i have 30lb injectors and a pro-m 77
what injectors and mass air do i need to go with
i dont want to use an FMU if i can get away with it
i am also thinking of buying a t-rex inline pump
what do you guys think?
thanks a million
How many pounds of boost are you looking to get?
Ian
whatever the stock pulleys will allow
this is my daily driver so i cant split the block just yet
You can use the 30's for now with the stock pulley setup on the blower, but you will have to use the fmu. You will need to get the MAF recaled. You have exhaust yet?
Mike
If you run 42# injectors and an appropriate MAF sensor, maybe having your 77mm re-calibrated, you won't need the FMU, but you'll need a chip and a dyno tune to be safe. Also, it would be in your best interest to install a pusher pump regardless of the boost levels you'll run. It's better to have too much fuel than not enough.
i have longtube header, matching h pipe and mufflers
so will 42's and say a t-rex be enough for 8-10psi?
Yes, they should be enough to feed your combo without the FMU. My car made 472rwhp will 36's. I would also suggest that you get it dyno tuned.Quote:
Originally posted by FoMoCo1
so will 42's and say a t-rex be enough for 8-10psi?
Doug