SN 93 rebuild diagram

Hello, My name is Michael. I have a 98 Club Cab Dakota, Paxton SN 93, 406 ci. Stroker.
I am rebuilding my Paxton, Does anyone have a rebuild diagram for the SN 93? I just replaced the bearings and seals in the one on my 98 Dakota, and I am putting it back together. I also need to know if the pulley or any other part of the unit has to be torqued properly, if so what are the torque values? Also I broke the spring that secures the oil pickup. Where can I get a replacement spring?

I have never taken pictures during dis-assy so can't help you on that. I guess you did not record the torque when removing the internals so now it is guess time because I don't think Craig will help at Paradise Wheels but you can try. The spring you can get at any hardware store or a multi pack at the parts store under the 'HELP' name.

Thanks for the help on the spring. I went to the hardware and found almost an exact match.

Any idea how much oil does the SN 93 hold in it's case?

8oz then check the stick because fluid goes into the pump tube.

Thanks for the info :D