I normally see about 18 lbs of boost with my S-trim :)
Printable View
I normally see about 18 lbs of boost with my S-trim :)
I'm pushing 14#'s with my S-Trimmed Cobra.:D
Razor.
I see a peak of 12lbs on a home tune. Just found out that I probably have a leaky HG (there goes the home tune). After a dyno tune I may kick it up to ~13psi with the alchy spraying
I would like to run 140 mph what ever boost it takes to get me there.
I ran about 10psi with my powerdyne setup and am expecting about 15-16 with my S-trim... (using 8-rib, blower brace, powerpipe, and Renegade pullies)...
Well, if we are talking about how much boost were seeing according to the diameter of the pulley, then I am running the standard 8-10 psi/3.33 pulley. Now, if we are asking how much boost are we seeing, then that would be 12 psi with the powerpipe. Would like to add a 3.12 pulley or just do the 7 inch crank pulley since it wouldn't tax blower as much. Time will tell, or not.
I'm running 10-11lbs boost, want to run as much as possible, keeping it reliable.
setup for 27lbs with a D2R:D
Holy Crap!!!! You da man!!!Quote:
Originally posted by ProCharged357
setup for 27lbs with a D2R:D
I'm also running 12# at 6000rpm. I don't want anymore right now. Still a stock engine.