What was your hp with the 22lbs 20 lbs and 18lbs. This may help me to compare to my setup. Also what is your motor setup. Just the main info. Cubes, heads, injectors, computer, intake. Thanks.
Printable View
What was your hp with the 22lbs 20 lbs and 18lbs. This may help me to compare to my setup. Also what is your motor setup. Just the main info. Cubes, heads, injectors, computer, intake. Thanks.
For anyone who is interested, these are the parts I have and the associated retail price (I know it is not worth retail used - don't worry).
Cog Pulley Pack, 35MM, 27 Tooth S/C Pulley, 73 Tooth Crank Pulley, Accessory Drive-UD
8E030-027
$517.95
Supercharger Drive Pulley, 35MM Cog, 28 Tooth
2A033-028
$110.95
Supercharger Drive Pulley, 35MM Cog, 30 Tooth
2A033-030
$110.95
Supercharger Drive Belt, 1392MM x 35MM Cog
2A042-138
$105.95 x 3
(Can’t find the part number: Mondo belt guide for 73 tooth crank pulley)
$50
(Extra idler pulley - can't find part number)
$100
---------------------
$1,207.70
With 18lbs = 725 RWHP/720 RWTQQuote:
Originally Posted by BLOWNBY
With 20lbs = 770 RWHP/740 RWTQ
With 22lbs = 770 RWHP/790 RWTQ - My plug gap was too large (.040) and my plugs were old so I stopped dynoing this day and replaced the plugs (new gap = .030). Since then I have not been back to the dyno. If the graph had remained consistent (which it had for the previous runs) it would have made 820 RWHP.
All of these numbers were with my rings not seating (25 % leakdown). My guess is when I get good rings installed I should see another 10-30 hp.
I am going to sell my 35mm setup. If anyone is interested let me know. Otherwise I will post it on eBay in a few weeks... Any of the parts listed above are available (no need to take everything).
Is this dual idler setup available still? I need the dual idlers and the thick aluminum brackets. Everything in the pic at the beginning of this post.
Not at this time, but we will open back up in time for the new season.
Thanks.
;) excellent.
Make that setup for a driver side? I have z trim on a 408 and would like some thing like that set up but for 50mm belt.