WHAT SIZE INJECTORS AND MASS AIR?

I recently bought a p600 and wanted to know what kind of injectors and what size you other guys are using. Also what size mass air meters are you using. I have a 75mm pro flow and 24lb injectors now and i was told that this wasnt enough. Thanks

This really depends on a few factors....

How much boost you gonna run??
Do you use a FMU???
What are you goals, H/P wise and boost wise?
What's your current combo??

My mods are cobra u&l, 75mm pro flow, 24lb injectors, cam, tremec trans, msd ignition, bbk headers to flowmasters. It is a p600b with a 2 core cooler and a 14 pound pulley. Thanks

36's may just barely work for the 14#'s, you may have to go with 42's to give you enough "play" room. Do you have any other fuel system upgrades??

I dont have anything else. The kit came with an fmu. Should i get something else? Thanks

What size fuel pump you running??? You're gonna need a larger than stock pump (volume wise), alot of us run the Walbro 255 in tank, some of us run an additional in-line pump as well.

I dont have a bigger pump now, but will invest in one. Also what mass air should i use?

Pro-M 80 shorty, if you plan to have your car tuned check with the place that will be doing to see which calibration they prefer/recommend. Alot of tuners prefer a non S/C'd meter vs. a S/C calibration meter for ease of tuning.

What do you think i should do, use a walbro like you guys? Also what size maf meter are you using? Thanks again

Walbro is a solid performing quality pump and you can pick up a 255 liter per hour one for around $100.

As far as the MAf goes, I prefer the Pro-M 80 mm meter. If budget is tight I think a 75mm would serve you well.

I already have a 75mm pro flow, will this work if it is recal'd?

If recal'd, yes.

Do you know where and how to get it recal'd? And how much it costs. Thanks for all of your help.

$109 plus shipping according to their site

Here's the recal sheet you'd need to send with the meter.
http://www.pro-flow.com/Price%20Deal...20form%201.htm

You could sell your meter for about $100 on the Corral or here and then pick up the 80mm unit for about $200. You've have a better meter for about the same cost.

I found a pair of 42 injectors off of a 96 gt, will these fit mine?

Those will work, verify the color of the injectors with the seller. They should be lime green.

They are all black. He said he was unsure of the brand. This is what he said:




These are 8 like new 42 lb fuel injectors. They were new when I bought them abouth 6 months ago. Rising gas prices have made me decide to go back to stock injectors. Im not sure of the brand. They are all black and out of a my 96 Mustang GT. They are low impedence so they will drop right in your mustang without any computer upgrades. I paid over $400 for these but you can get them for significantly lower.

Gonna have to raise the BS flag, if the guy was running 42's there must be a reason and for him to go back to stock injectors cause of rising gas prices is absurd unless he just slapped 42's on a car with minimal mods.... You see my logic??

If they are indeed 42's then they are not the Ford (bosch) injectors as those have lime green tops. I'd ask him if he can provide a receipt or direct you to the place of purchase and get in contact with them to acertain make and if they are truely 42's. I'm not familiar enough with the other brands to comfortable give advice here.

You may also try to post in the general section here, someone here will know for certain.

Do you think i would be ok with motorsport 36lb's and the fuel pump and fmu?

Hey i found a pair of 42lb ford grren tops off of a lighting. The guy said they work on mustangs...is this true?

Yup, those are the ones.

Hey i was lloking at the prom pro solutions mass air meter. What do you think of that? Detailed Description
The new "pro solutions" Blow Thru mass air meter is specifically designed for ATI supercharged cars, however, it works great on any "blow thru" application. This meter was designed to replace the "univer" meters. They offer better idle quality and tuning capabilities and they are a fraction of the cost!

I have no experience with those, haven't even run across any internet rumors on them....

Will my car run with the supercharger on it and the setup i have now? 24lb 75mm mam? I dont have enough to get the 200.00 mam and the 500 injectors. I will have the $ in about 4 weeks. Should i just wait to put on the sc? Thanks