Hey guys,
Here is a quick 2 minute video of my car running. You can really hear that D1!!!
The video is 9MB and is in Windows Media Format (WMV) Right click and Save Target As....
http://www.prochargerpower.com/video...rpower_ian.wmv
Ian
Printable View
Hey guys,
Here is a quick 2 minute video of my car running. You can really hear that D1!!!
The video is 9MB and is in Windows Media Format (WMV) Right click and Save Target As....
http://www.prochargerpower.com/video...rpower_ian.wmv
Ian
Holy Friggin Dial-up Unfriendly Ian. I'll let ya know next week what I think once it finishes downloading. :D
Get out of the stone age man! :D
Ian
Ahh I see how it is LOL :p
Ian
lol
Well it finally downloaded, then my media player took another 10 minutes to download the proper codec for it. I must say Ian that thing sounds pretty damn mean though. What does your exhaust set-up consist of?
Hell of a job to Ian. Now go take some vids of it going down the 1320!!
very very nice! bad azz soundin! That cam sounds wild!
Thanks guys :D I am using the Trick Flow Stage 2 cam - it is awesome!
My exhaust is all MAC - long tubes, cat h-pipe, and mac cat back. I just passed emissions a week ago :D
Ian
nice car ian
I've got a brand new Stage II collecting dust, good to hear that you give it a good review. If my damn block ever shows up I may be able to get this thing under way!!
Thanks Mike...how is yours coming along?
Sean I really like the Stage 2. I have lots of vac for brakes, it sounds awesome, and wants to pull well past the 6K limit. It is a perfect match for my 3K stall, and BOOOOOST.
Ian
Looks and sounds awesome Ian, get some incar video :)
Thanks Hust...I will try to get some this week.
Ian
It needs to be louder Ian.:eek:
Which part Steve? The exhaust or the blower?
Ian
Hehe both.
Then again maybe all will change when we get some driving shots of the beast.:)
It is fairly loud - the cats really help to quiet the exhaust. I have yet to get any hassles from cops but people know when I am coming :D
Ian
dial up sucks. must get DSL at least.... damn 30 minutes to download. i am sure it'll be worth it by the above posts....
this might be a dumb question but do you like it beter than the novi1k you had?
Kool: 100% yes for lots of reasons...
Ian
What are the reasons buddy?
Very nice Ian, I'm happy for you.
Brandon
There are quite a few but here are some...
1 - 12 Rib, seperate
2 - Intercooled
3 - Self Contained - oil temps are lower
4 - Stainless steel hardware
5 - Huge brackets
6 - Lots of CFM, boost comes on nice and early
7 - Easy to follow instructions
8 - E-mail support answers in 2 hours or less
9 - I met ProCharger face to face at WFC 6 and they were great!
10 - Sounds and looks AMAZING :D
Ian
Cool Ian. I do have the novi 1k I've had since WFC but I'll finally put it on this Sunday. It's the 2 belt design. Where should I start to see 1 pound or more boost? I still love the vid's of you driving down the road with the novi1k;)
LOL thanks..those vids are very popular..I have the camera so when there is a nice day this week I will take some more vids for everyone :D
I would guess you will see a 1lb or 2 around 3400-4000. Chucks car (old NOVI 1K) turns into a monster at 4000 RPM.
Ian
Sounds like a grudge race to me:D .Quote:
Originally posted by Ian
I would guess you will see a 1lb or 2 around 3400-4000. Chucks car (old NOVI 1K) turns into a monster at 4000 RPM.
Ian
:eek: -You can't say that in here.Quote:
Originally posted by Ian
There are quite a few but here are some...
1 - 12 Rib, seperate
2 - Intercooled
3 - Self Contained - oil temps are lower
4 - Stainless steel hardware
5 - Huge brackets
6 - Lots of CFM, boost comes on nice and early
7 - Easy to follow instructions
8 - E-mail support answers in 2 hours or less
9 - I met ProCharger face to face at WFC 6 and they were great!
10 - Sounds and looks AMAZING :D
11. The prez of Vort*ch & *axton is an AZZ
Ian
Umm Doug..I do not remember number 11 :D LOL
Ian
I can read your mind:D :D :DQuote:
Originally posted by Ian
Umm Doug..I do not remember number 11 :D LOL
Ian
LOL you know me so well eh Doug...
Ian
Doug ya kill me!!
lol @ douglas! lol
I see your points Ian. I only like the brackets on versions like your's though. The ones with all the accesories suck from what I can tell.
When are you going to get some sort of metal for that thing to breath trough?
Brandon
D A M N IAN!!! That beetch sounds evil! It would be extra cool if you could slap some dynomax race bullets or some borla xr-1 mufflers with your setup.
IT WOULD SOUND E V I LLLLLLLLLLLLLLLLL!
The whistle is very loud compared to an s-trim. My cobra was no where near that loud, and please note my beetch was loud :eek:
CONGRATS IAN! :D
[eric cartman] LOOKS and SOUNDS SWEEEEEEET! [/eric cartman]
/me misses owning a blown stangy... :(
Dougy! You forgot one!
Quote:
Originally posted by Ian
There are quite a few but here are some...
1 - 12 Rib, seperate
2 - Intercooled
3 - Self Contained - oil temps are lower
4 - Stainless steel hardware
5 - Huge brackets
6 - Lots of CFM, boost comes on nice and early
7 - Easy to follow instructions
8 - E-mail support answers in 2 hours or less
9 - I met ProCharger face to face at WFC 6 and they were great!
10 - Sounds and looks AMAZING :D
11. The prez of Vort*ch & *axton is an AZZ
12. Makes cruising the middle schools easier, by me not having to whistle at the chicks all the time... It's all about the lunch money and procharger hunnies!!! :cool:
Ian
Now come give your uncle Chris a hug you procharged warrior you :D ;)
LOL Chris...
Have you heard the Dynomax mufflers? I have been thinking about changing but I have never heard them before.
Ian
Ian if you are looking for loud, check out http://www.spintechmufflers.com , there is a couple of vid's on the site
I picked up a set here recently from a dealer that used to list them on e-bay.
The Dynomax bullets are just sick...
This guy I know has a basically stock mustang, FOR the exception of an e-303 cam and race pulley... stock heads, stock intakes, etc... He does however have the Dynomax Bullets, and I thought his car was a heads, cam, intake car by the way it sounded. It was a clean light idle to his car, but when he would nail it, it sounded like a screaming demon. The sound is wicked and that was with weld in muffs with tailpipes!!! :eek:
At first I thought he had borla xr-1's which are evil plain and simple. I was VERY impressed and for the price I would get the bullets without hesistation.. $30-35 bux per muff compared to $180+ each for the borla xr-1's!!!
:D
You can call me Ian and here what they sound like over the phone:D . I run spintechs on my car with turn downs when I go to the track, maybe its the compression in this motor, but they are LOUD!!!!! I wouldn't recommend spintechs on a street car.Quote:
Originally posted by Ian
LOL Chris...
Have you heard the Dynomax mufflers? I have been thinking about changing but I have never heard them before.
Ian
Quote:
Originally posted by Doug
You can call me Ian and here what they sound like over the phone:D .
You just got my nipples hard.
:D ;) :p
Once again...twisted! LOL
Ian