Does anyone have any pics of your SN series supercharger mounted on a 94-95 Mustang GT. Thanks
Printable View
Does anyone have any pics of your SN series supercharger mounted on a 94-95 Mustang GT. Thanks
Here's my SN93, on an 88 LX, hehe
F=MA
If nobody is running a 'SN' on a 94-95 maybe I can get some pictures from FFW on July 8th weekend in Norwalk. The truth is by the 90's the Ball Drive was on the way out and replaced by other models and brands. I am not sure how many 94-95 kits for the 'SN' ever sold to the public. I will do some magazine searches and see if I can find a install article for you but really can't remember one but I have 1000+ magazines so I should find something with one installed for the 94-95.
How do you like these ball drive blowers? I've been doing a lot of reading on them, parts are very scarce and I keep reading things like they can lock up and overheat.
I just bought a rebuilt one on ebay for $1000. I haven't even recieved it and Im already concidering selling?
Don't push the blower past the recommended use and it will run a long time and will give you more power at 5psi then any other blower at the same psi. Parts can be found new to rebuild and the average person can do it themselves. They are a simple design and many of these units are still being used on early Shelby Mustangs, Hudson and Avanti.
whats up, i am new to this sight and i am running an SN93 on my 95 GT, i did a 93 TB conversion so i could run 3" pipe. if the rain stops i will take some picks tonight and post them.
That would be great, alot of questions in the past year about installations on the 94-95 5.0.
here u go hope this helps.
uploaded some picks but i do not see them.
Keep trying, Id love to see them.Quote:
Originally Posted by mustbastang
metoo, failed to set the link despite saying all was well.Quote:
Originally Posted by mustbastang
F=MA
Try uploading at photobucket.com
From there you can post pics.
sorry this the best i could do, let me know if anyone has any questions about install.
Good pics man. I notice the 93 intake conv. Looks good. Yeah that bracket is what Im taking notice of. Thanks
Now I have seen a different install for the 94-95. The install I have seen left the alternator at the top and the supercharger went to the right of it. The bracket that is on this 94-95 is like the updated 87-93 bracket kit. What am I missing on this install? Did Paxton change everything on the 94+ kit so they could you use the more common parts list. Engine looks good by the way.
i bought the S/C used from some one that had it on a 95 with the standerd tb set up and i found the pipe was only 1 1/2", so i did the 93 conversion so that 3" pipe could used,so i made the intake pipe between the S/C and intake out of 3" copper and used engine paint to coat it, the bracket that came with the S/C put the S/C right where the ignition module hanges in front of resivor bottle so the bracket had to be cut to fit S/C and i relocated module, all the work this change took was well worth it.
OK that explains your install. It really does look good but just something you should be aware of is that copper holds a lot of heat and that discharge pipe is getting heated from your headers so now your adding additional heat into you intake. At one point it would be a good idea to use Furnace PVC rated pipe or Aluminum or even a shield or a high temperature wrap to put on the pipe like what is used on turbo installations to block heat. I have seen a loss of 12hp for every 25 degrees of additional intake temperature on the discharge pipe. I myself going water injection and even at 2psi you can run a small enough mist to drop intake temperatures and yet at 5psi see a large increase in horsepower.
i have two picks of a sn2000 on my 94, the throttle body is in the stock location, i got the kit off ebay last year and i don't know if it was originally for the sn95 body style but i was told it was, the only thing i had to do is fab up the discharge tube because the one that came with it was for the fox, the pics are in my images.
Well it looks like Im going to be selling. I just recieved the 94-95 kit from craig at paradise, he sent everything he had for the 94-95 and althought its a lot of parts its not everything. The main part missing is the back part of the mounting bracket.
The supercharger kit I bought off of ebay is for a 89 Mustang GT I had hoped to get enough parts from paradise to make it work but it looks like Im screwed.
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT
Anyone interested?
If anybody still needs pics of an installed sn2000 on an SN95 (94-95 mustang), let me know.
I just took a bunch of pictures of one installed and it being un-installed so I could use that to put it on my car since I couldn't find any directions.
Glad I found this website, its been very helpful.
nice pic's
Guarddog, if you still have those pics I'd be interested. I have an SN93 installed on my 94 GT, but need to do some work on the inlet routing. Mine currently has the air filter fitting so tightly at the left front of the engine bay you pretty much have to crush it to get it installed. I'd like to to relocate it inside of my fenderwell.
I'm interested in pics and descriptions on how other people have done this mod. Speedytang mentioned furnace PVC, I will look at Home Depot for this. Also, does anyone have a good source on where to purchase affordable silicone couplers?
I bought mine silicon couplers on Ebay, they are cheap n several colors.
Here's mine. Dyno'd at 379rwhp/383rwtq with 8psi@6k rpm.
http://www.stangnet.com/mustang-foru...e9cba587e6.jpg
That bracket is straight from Paxton/NOVI-GSS.
I bought the kit off e b a y. It came with a copy of the install manual which included pictures and parts list.
My whole system is factory except for the inlet pipe.
Just a stock block 5.0 with an Expolorer intake/Y303 heads/1.7 rockers/full 2.5" exhaust with cats/PMAS 80mm/42lb inj/190lph in-tank pump/UPR inlet pipe/generic bypass valve assembly/SCT chip and dyno tuned.
Everything else is stock.