Just bought N2K need some advice

Well I am new and have a couple of ? I just bought a used 2k for a good deal. But I get it and it has 3 impeller fins that have been damaged. I cant tell if they have been welded or just bent and then bent back. Is this a cause to be alarmed? They look well repaired and have been smoothed. I know these spin at around 40-50k so just wanted some advice. Really done have the cash to send to Paxton. Everything looks and feels tight. Wont be used to race mainly to tow or just cruise. Also was wondering if anyone can give me a rough estimate on boost numbers on SBC. Combo is

383 SBC, Sportsman 2 heads, Comp 270HR roller, Performer RPM air gap, 750 DP, 1 5/8 headers, Flowmasters, 8/3.5 pulleys, Peak power at about 5500-5800 rpm.

any help would be appreciated. Thanks for helping the Newb.

Forget it if the impeller has been damaged because the balance is probably off and now everything is brittle . Do you have a digital so you can take pictures and post.

Yes I will post pics later tonight. Thanks

Yeah I'd be concerned about the balancing as well. Plus if something let's lose you'll have some engine damage. :shocked: Don't risk you rmotor!

It may seem OK while you spin it at 300 rpm's but at 40,000+ watch out?

Can I just email the pic to somebody that can tell me whats up with this blower? Did Paxton grind on or polish the impeller to balance it? Thats what it looks like. All the tolerances are correct and the fins are straight but 3 fins in a row have marks on them from grinding and polishing. Thanks for the help guys

oh yeah can anyone tell me about boost numbers?

put the picture in your photopost area or send it to speedy.stang@netzero.com

I had the same thing on my Novi 2000. It is for balancing. It looks like someone grinded the blades as if they took off some metal. I had no problem with mine. I'm not saying that it's not damaged. You should just make sure. I would like to see those pics.

Picture uploaded. Thanks Guys

Is that Weld or that liquid Cold Weld around the blades. I can not really make it out. I wonder if something fell into the unit and broke the base of the blades away from the impeller shaft.

those are balancing marks

Does anyone else think these are balancing marks? I need a couple more opinions. thanks

ive own about 6 novi 2000's in my renegade lifetime... they ALL were like that and none of them had problems.. i am 99.999999999999999% sure those are for balancing

Cool, thanks for the replies. I was hoping someone would say that it wasnt toast. I bought it planning to use as is. Dont have the cash to fix it. What about boost numbers? Thanks

Anybody else want to chime in on this? With all due respect Hawaiian I'd like another opinion to ease my mind. Thanks

no prob

Looks good to go!

Those are balancing marks for sure. I had a Novi2k, and mine looked worse than yours in that regard. The Novi2k is a nice blower. Keep us updated on how it goes and how you like it.

So did I do good for 710.00 delivered? I also got a tensioner setup. but no bracket or crank pulley. I have a bracket for it but need a 8 rib? crank pulley for a Small block chevy if anyone has one. Thanks

yeah astro those are balancing marks i just bought a n2k and the guy i got it from told me the same as the other guys