OK I'll keep my eye out for one....probably going to have to wait until after Christmas :(
Printable View
OK I'll keep my eye out for one....probably going to have to wait until after Christmas :(
If anyone has a 3.5 or 4 inch pulley Im interested in buying it.
I see about 11-13#'s, depending on the weather with the stock pulleys. With a 3.1" blower pulley I see 19#'s @ 6300. I am using the Gates 100563 belt, the belt fits with both the stock 3.5" and the 3.1" pulleys. To use it on the 3.1" pulley I have to route the belt towards the outside of the lower tensioner pulley (the stationary one). At first I was getting a little bit of belt slip, then I found some sticky stuff at Napa and put a little bit on the belt and it solved that problem.