-
My current project
Working on my brothers car....project Cobra.
1996 Cobra
Forged internals
Little bowl blending and cleanup work,3 angle valve job
Crower cams
Vortech S trim upgraded to T trim
RR 3.2 6 rib pulley
Vortech Aftercooler
'03 Cobra Mass Air Meter
55 lb/hr Siemens high imp.
Anderson Power Pipe
Vortech mini race bypass
Second Street Speed twin in tank bosch fuel pump
Aeroquip TFE fuel line -8,-6
Billet fuel rails(DOWNS)
Aeromotive filter and regulator
QA-1 Tubular K-member
Motorsport shorty headers ceramic coated
Bassani cat x pipe
4.10 gears
Girdle(DOWNS)
31 spline mosers
Eaton posi
Steeda Aluminum Radiator
McLeod StreetTwin/billet steel flywheel
Tremec TKO
MSD-DIS 4 Plus-MSD coil packs-2 MSDTach Adapt
AND MOST IMPORTANTLY A STAINLESS BRAIDED OIL FEED HOSE FOR THE BLOWER!!!!!!!!!!
Once this is all up and running and tuned i'm guessing 14 psi and somewhere in the 525 rwhp range.
If anyone has any tips,recommendations,or comments feel free to shout out.
-
That'll be neat project. What's the goal for the project? Street/strip?
-
Yeah just mostly street...maybe bring it to the track once in a while...but the suspension is set up for handling and will never get decent traction till that changes. Just a badass street car with great manners and driveability...keeping it sorta conservative...i think people trust pump gas a little too much. It's got a Tremec TKO and with too much traction that thing will be toast quickly. I'm starting to think the boost will be closer to 13 psi