I want to bypass the smog pump and A/C on my 95 with a P600. Is there anyway I can do this without having to buy the eliminator pulleys? I figure just some revised routing and a shorter belt, but wanted some suggestions. Anyone done this? and do you know what size belt I would need?
I did it and it was not good because the idler will start to make cracking sound, and the belt will run against the power steering pulley at the bottom, and you will buy belts every couple of weeks. but if you dont mind that I think the belt size was about 101 inch, not completly sure but close. hope this helps
So I guess thats the reason why you almost have to have the A/C eliminator kit... I figured that, as close as the A/C is to the power steering.
I left my smog pump off mine and it seemed to be fine, you need to get the belt on as tight as you can get it though....i also used a pulley off a fox body and put it on my tensioner becuase it has a lip on there....i have a 3" pulley on there now and i used a 103.7 belt...as for the a/c i was thinking about getting the eliminator kit...has anyone done this with their 94/95 d1 set up??