Can you clock the blower when it's installed?

I need to clock the blower just a hair.

Can I do this with the blower in the car? Or do I have to remove the bracket, the oil return line, and pull it out of the car?

Just take the blower off the bracket and then you can get to the case bolts and rotate. No reason to take the oil line off.

You must have smaller hands than I. I couldn't reach the lower bolts because of the alt/smog pump. I'll try again. With a bigger hammer!

all I did was loosen the volute bolts a lil bit and used a hammer to tap it down to clear my hood.