newbie and his install on a 65 Mustang
Hya guys,
Been looking at that website for a while now (extensive use of the search button, I can tell you that).
Background info,
I bought a SN93 off eBay about 4 years ago, it was a second hand one but never been used.
had the blower + a crank pulley + elbow pipe and a spare pulley for the SN93
Fast forward 4 years.....
Found a bargain on eBay for the front plate, so had to buy it.
I then saw a 10 or 15% discount on the CUNDN eBay shop for certain parts, ie: main bracket, so again I bought it.
A thread without a few pictures is boring so.... enjoy (the SN93 install is a work in progress...)
the car:
http://www.thefroginator.co.uk/pictu...4042010019.jpg
My modified main bracket:
http://www.thefroginator.co.uk/pictu...3052010023.jpg
http://www.thefroginator.co.uk/pictu...6052010033.jpg
I had to modify it to be able to fit the alternator exactly where I wanted.
It might not be the best idea/work but it does work in my case.
My blow through carb
http://www.thefroginator.co.uk/pictu...4042010016.jpg
boring specs of the carb, if you are interested
Annular boosters for excelent signal and fuel distribution.
Screw in air bleeds for ultimate fine tuning of the fuel curve.
Machined cavity shooters with tube extensions for upper end pullover enrichment.
Holley cast Metering blocks have been enhanced with enlarged main wells for strong fuel delivery.
Screw in 3 circuit emulsion bleeds.
Screw in idle feed restrictors.
Screw in power valve restrictors.
4 Corner idle mixture control
Base plate has been resurfaced top and bottom.
Profiled throttle shafts.
Throttle shafts have been machined to accept teflon sleeve seals
Bowls machined to accept crossover balance tube to equalize pressure diferential between the front and back fuel bowls.
High flow .120 needle and seats
Solid nitrophyl floats( secondary float, notched for jet extensions)
Secondary jet extensions.
Powder coated high gloss black and metering blocks annodize red.
The SN93 itself (remember, it's a work in progress so things might change)
http://www.thefroginator.co.uk/pictu...8052010043.jpg
http://www.thefroginator.co.uk/pictu...8052010051.jpg
Engine itself:
SVO 342 Ford Racing block
DART pro1 heads
Weiand X-CELerator Intake
Compcam 276HR
Mallory Max-Fire dizzy
and other go-fast parts bolted to it
You can look at many many more pictures on my website (about 2500+) at http://www.thefroginator.co.uk/
