blower cam and RPM intake for sale

I'm selling my blower cam to go solid roller for a turbo. It was cut by Comp cams and the grind number is FW 3317/3151 HR115+3.

The specs are as follows:

Ford 351/302HO HR/SR setup
Gross lift: .576/.576 with 1.6RR
Duration @.006 tappet lift: 293/318
Duration @ .050: 242/252
Lobe lift .360/.360
Intake Center Line @ 112
Lobe Center Separation of 115

Was run on a big blower setup on a low 3XX ci motor and an auto.
This cam really sounds great and is in great shape. I just don't run a blower anymore and am going solid roller with a big turbo.

$150 plus shipping

Also have a ported RPM EFI intake for sale. I had it blasted and painted 1500* aluminum silver. The 2 unused bolt hole risers were ground down to fit 1/2 inch billet rails that are included for the price. I want $350 for the intake with rails or $300 without the rails. Pics on request of the intake. Cam will be out of the motor soon and will get pics.

reedfamily@bresnan.net

Thanks
Dave

Intake is sold. Still have the cam for $150 shipped in the US.

I'm also selling the Hooker headers too. They are painted high temp too. 1 3/4 primaries and 3" tri bolt flange. The headers are angled closer to the motor than from the factory so they fit the lower portion of the fox car better. They worked with my TKO setup and my current C4/C5 setup. Starter removal and fitment is still perfectly fine. I'll include a 3" welded short X pipe that already works with a Fox. It's all tucked up to ther car nicely and there is a slight bit of grinding to do on the tranny crossmember to keep it from rattling on the underside of the car. I'd like to get $250 for the headers and X pipe shipped in the US.

E-mail for pics.

Thanks
Dave

Headers and intake sold. Cam is out of the car and ready to go.

I'd be willing to trade for a billet 351 distributor for carb setup, 75 or bigger TB for EFI, Carb RPM intake for 351 or make a trade offer. I need alot for another project I have.

Thanks
Dave