Printable View
im am fixing to install this supercharger on my car.would like to here from some people how have this setup and how it is working for them.also how long have they had it.i have almost all the bolt ons i want.full exaust,ect....just want make sure my motor will hold up.the car will be prof. tuned as will.thanks
Had a lot of tuning issues w/ no help from ATI at all. Check out this thread on here if you haven't already. Should be helpful.Quote:
Originally Posted by 02blkgt
P1SC thread
that does not sound like ATI is very helpful.my car is being done by Houston Performance.how is your car holding up.think my 4.6 can handle 9 or 10#s?is that to much on a stock motor that is a daily driver?thanks for the help
9lbs may be pushing the stock internals luck! Here is what happened at 8lbs with my stock block just after about a month of use. I would recommend 8lbs and a great dyno tune (SCT or EFI). Also ensure that you get the 03 Cobra Tank and pumps, maybe even a KB BAP. To do it right you will have between 5 and 6K invested in your P1SC install (blower, injectors, meter, guages, cobra tank and pumps, Dyno Tune). Don't go this route if you are not ready to rebuild or replace your motor. Anything can happen once you start playing with Power Adders.Quote:
Originally Posted by 02blkgt
Good luck, Ralph
And now the pic of my 8lb accident:
Here was what I found when the head was removed! This block was trashed.... cracked cylindar wall and everything. It is messed up, but I love these pics! Strange, but this gave me a reason to build a monster!!!! Once you are addicted to boost there is no going back!