Results 1 to 4 of 4

Thread: what might i expect

  1. #1
    Junior SCH Member
    Join Date
    Nov 2011
    Posts
    3

    what might i expect

    i would like to use a ati m1sc (boat blower) on a 418ci sbf engine,tech at ati set me up with a renegade 12 rib bracket for my 90gt,i am very new at this and need some input,to help me along the way,i do have a few different pullies for this setup.

    418ci sbf
    9.1 comp
    afr205 heads
    vic jr/elbow(efi)
    75mm t/b
    60lb inj. ba 2600 mass air meter
    hooker 1 3/4 long tubes
    3 core air to air
    want to be in the 500 plus rwhp range,any info would be appreciated

  2. #2
    Senior SCH Member vinces427bb's Avatar
    Join Date
    Jul 2011
    Location
    Los Lunas, NM
    Posts
    222
    http://www.procharger.com/pdf/PC_Marine.pdf

    how much boost are you looking to develop ?
    any idea of your NA-horsepower??
    that m1sc can produce 1400-cfm,
    if you don't make 500+rwhp your engine is broken...

  3. #3
    Junior SCH Member
    Join Date
    Nov 2011
    Posts
    3
    na should be around 450ish,hoping for around 10lbs,kicking around the idea of going without the cooler .

    howmuch boost do you thinnk is ok b cooler is needed

  4. #4
    SCH Owner Michael's Avatar
    Join Date
    Aug 2005
    Location
    The Motor City
    Posts
    1,373
    Quote Originally Posted by tonyt View Post
    howmuch boost do you thinnk is ok b cooler is needed
    With a 1400cfm flow rate, when you start seeing boost in the 8psi-10psi range, then an intercooler becomes a serious consideration; above 12psi and it's almost a must.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •