Results 1 to 8 of 8

Thread: timing for sn93

  1. #1
    Junior SCH Member
    Join Date
    Oct 2011
    Posts
    19

    timing for sn93

    Is there a basic total degrees of timing to start with. 20 - 22 or higher?

  2. #2
    Senior SCH Member vinces427bb's Avatar
    Join Date
    Jul 2011
    Location
    Los Lunas, NM
    Posts
    222
    what is your set-up???
    engine?
    FI or carb??
    what fuel?

  3. #3
    Junior SCH Member
    Join Date
    Oct 2011
    Posts
    19
    306, edelbrock performer rpm intake and heads, 70mm t/body,24lb. injectors, fmu (size?) 76mm maf, base timing at 10 deg. boost timer module set at 2 deg per 1 lb. boost, 92 octang fuel. 6' and 4.25' pulleys

  4. #4
    Senior SCH Member vinces427bb's Avatar
    Join Date
    Jul 2011
    Location
    Los Lunas, NM
    Posts
    222
    http://superchargerhelp.com/search.php?searchid=66642

    this should get you headed in the correct direction :)

  5. #5
    Junior SCH Member
    Join Date
    Oct 2011
    Posts
    19
    link no open.........

  6. #6
    Junior SCH Member 64wagon's Avatar
    Join Date
    Jan 2010
    Location
    south Louisiana
    Posts
    21
    I dynoed a 347 and finished with 28 deg. total timing. i've alum heads

  7. #7
    Senior SCH Member vinces427bb's Avatar
    Join Date
    Jul 2011
    Location
    Los Lunas, NM
    Posts
    222
    i did a search for
    "306+timing"
    there were many threads on this :)

  8. #8
    Junior SCH Member
    Join Date
    Oct 2011
    Posts
    19
    Thank you very much

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •