Im using a 6.5 from a gt on my cobra and its almost hitting the water pump pulley ?
Im using a 6.5 from a gt on my cobra and its almost hitting the water pump pulley ?
Hi there,
With a 7" crank pulley you may need a smaller water pump pulley.
See ya. Michael Plummer
94 Mustang GT
545rwhp w/P600B on race gas
533rwhp w/D1 on pump gas
new combo coming soon
your running the stock pullies correct.. you don't have an underdrive water pump on it do you. aren't they bigger.
95 GT MOVIE HERE
__________________________________________________
92 GT, BBK CAI, Mac Headers, Off road H pipe, 2 Chamber Flows, Underdrive pulleys,
High Performance AOD, Edge Converter,tubing, etc, etc
Yes im using the stock pulley. I had underdrives but it was to big for even the stock cobra crank pulley. I now have stock water pump pulley on with a 6.5 gt crank pulley and they are so close there bout to touch ?? I dont see how people use a 7" crank on a 94-95 ??Originally posted by ponyboy19
your running the stock pullies correct.. you don't have an underdrive water pump on it do you. aren't they bigger.
94 Cobra
Dart 363ci
F-1R, AFR 225s
Had a stock water pump pulley on my friends 94 Gt and put a 6.75" crank pulley on it. Was close but seemed to fit ok.Originally posted by 94BLOWNCOBRA
Yes im using the stock pulley. I had underdrives but it was to big for even the stock cobra crank pulley. I now have stock water pump pulley on with a 6.5 gt crank pulley and they are so close there bout to touch ?? I dont see how people use a 7" crank on a 94-95 ??
Dan
1995 Rio Red Cobra #2021
Dart 331,AFR185,D1SC,RPMII upper/lower
OLD
GT40X, E303, D1SC 13psi, 3 core intercooler, Magnaflow Catback, Hooker equal lengths, Mac Prochamber, 3.73, Auburn, Moser 31 splines, Pro-m75, MSD 6AL, TKO, Spec Stage III, Larocca Tuned
10psi 11:1 a/f= 464rwhp 431ft/lbs
11.9@123mph @13psi 1.9 60'
hp? tq?
Moderator of General Tech
What pulleys are you guys using ?
94 Cobra
Dart 363ci
F-1R, AFR 225s
I have the stock GT crank pulley on my 95 with the stock water pump pulley and it fits fine. There is plenty of room to put a larger pulley on mine.
1995 GT
Black on Black
T-5
D.S.S Pro Bullet 306
and almost every part in the FRPP catalog.
And a 'Strange' whistling sound under the hood courtesy of ProCharger......
Same here, stock Gt crank pulley which is 6.5" and stock water pump pulley with a 3.55" blower pulley, good for 13psi @6000rpm.
The stock cobra crank was 6.25"
Dan
1995 Rio Red Cobra #2021
Dart 331,AFR185,D1SC,RPMII upper/lower
OLD
GT40X, E303, D1SC 13psi, 3 core intercooler, Magnaflow Catback, Hooker equal lengths, Mac Prochamber, 3.73, Auburn, Moser 31 splines, Pro-m75, MSD 6AL, TKO, Spec Stage III, Larocca Tuned
10psi 11:1 a/f= 464rwhp 431ft/lbs
11.9@123mph @13psi 1.9 60'
hp? tq?
Moderator of General Tech
Posting Permissions
Reply With Quote
Bookmarks