I just purchased a vr-4 upgrade from craig at paradise wheels today, and i was wondering if anyone has any diagrams on how to install this into a sn 2000? Any info would be great.
I just purchased a vr-4 upgrade from craig at paradise wheels today, and i was wondering if anyone has any diagrams on how to install this into a sn 2000? Any info would be great.
The conversion should be easy. The rear cover and impeller are easy to change, and the last part to change. After getting the correct rotational torque set, shim the impeller to get the proper clearences in the housing. The VR4 impeller makes more heat so it has larger clearences.
Internally you will need swap out the beville washer for the stronger VR4 beville washer. Setting up the tension is important. The tension is measure as rotational torque. Check the rotational torque by turning the blower input shaft with inch/lbs torque wrench. A VR4 will need an extra 10-15 inch/lbs of turning force as it takes more hp to turn.
You may need a oil cooler for the head unit. THe blower compresses more air and generates more heat.
Is the kit you ordered one of the new ones Paradise Wheel is developing? Are they available now?
I plan to order one myself. The VR4 conversion worked well on my car. Worth the upgrade to me.
Ther may be assembly instructions for the SN type blower in a past post
Yes i have an oil cooler on my sn 2000 it runs very cool and makes 8 # of boost. I cant wait to get the vr-4 kit in it. It is one of the old vr-4 kits.
Bookmarks