http://www.rcdengineering.com/sprocket3.html
for those of you looking for cog pulleys.
http://www.rcdengineering.com/sprocket3.html
for those of you looking for cog pulleys.
Actually this link is more beneficial
http://www.rcdengineering.com/sprocket3.html
I'll update it in the first post also.
Is anybody on here running cogs on a street/strip setup?
If so what pulley combo's are you using and what kind of boost are you seeing?
TwEECer & Custom Chip Sales/Tuning - www.v8mustang.com
Couldn't tell ya, I have the ASP kit with 73/33 cogs but won't have engine assembled and running for atleast another month or two. I've seen a few guys on corral with cog setups (badlx, novi347, novi357, Novi blown 377), try asking some of them.
Thanks I'll search around for those guys. FWIW, I've got a 75/31 cog setup.
PM Novi357. He's on here everday(he doesn't work very hard) He's run every different combo between cog pulleys, 6 rib serps, 8 rib serps, and every other thing you can imagine. He might even sell you some used ones.
Doug
14-1 compression 402ci with a little nitrous
I've been PM'ing him over on the corral. He's been EXTREMELY helpful!
TwEECer & Custom Chip Sales/Tuning - www.v8mustang.com
I have 77/27 cog setup for my Novi 2000. My engine isn't running, it's still on the engine stand. My ratio is 2.85
Auto Specialties made my cog set and their web site is;
www.aspracing.com/
I recommend the RCD cog setup. The hub system is excellent and very cost effective.
Once you buy the hub, you can purchase any blower pulley for a great price and change them very easily. They also have pulleys in every size imagineable.
yeah, I just came across the RCD site. I'll definitely go that route as it's a LOT cheaper than buying ASP cogs.
I just put an ASP kit along with an extra pulley up for sale in the classifieds fyi
Bookmarks