Results 1 to 4 of 4

Thread: Bypass valve

  1. #1
    Junior SCH Member
    Join Date
    Feb 2003
    Posts
    11

    Bypass valve

    I'm having bucking issues at light throttle because my small bypass valve is not big enough.

    What is the best bypass valve that is big enough to stop the bucking issues I'm having?
    2002 GT Auto
    Vortech Polish SQ-Trim
    AFM Power Pipe
    90mm LMAF
    42lbs Injectors
    Chicane Sport Fuel Pump 255lph
    Fast Track Air to Air Intercooler
    FRPP 3.73 Gears
    FRPP 70mm TB
    Magnaflow Catted X-Pipe
    Magnaflow Catback
    Steeda Upper & Lower Control Arms
    Steeda Subframe Connectors with Cross Braces
    Steeda Wing
    Steeda Ultra Lite 17X9
    Auto Meter Lunar Gauge Cluster
    Auto Meter Boost & Trans Temp Gauges
    Cobra Front Bumper

  2. #2
    Senior SCH Member
    Join Date
    Feb 2003
    Location
    Houston
    Posts
    189
    I don't see the bypass causing part throttle bucking....but that's just me.

    Troy
    1995 Mustang Cobra
    302-10.77 @ 127.76
    new motor being built
    redsnk@yahoo.com

    owner/moderator
    http://www.stangtuning.com

  3. #3
    Senior SCH Member bumblebee03's Avatar
    Join Date
    Feb 2003
    Posts
    236
    The bypass will not solve your problem.... it is only used to releave pressure when off the throttle,,,, sounds like your problem my have something to do with your mass air sensor,, make sure it is working correctly,,, Bee

  4. #4
    Senior SCH Member
    Join Date
    Dec 2002
    Posts
    167
    i asked when the bucking was taking place in his other thread. i too don't see the bypass causing this problem. my msd6btm did this when it went bad. the boost portion of the unit stopped working so i had to diconnect the boost/vacuum line from it. it's now at msd getting fixed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •