Ive got the D1SC and Im using the bypass that came with the kit.Silver round looking one.How much boost can I run with that bypass.I am venting it to the atmosphere.Thanks
Ive got the D1SC and Im using the bypass that came with the kit.Silver round looking one.How much boost can I run with that bypass.I am venting it to the atmosphere.Thanks
Originally posted by spec
Ive got the D1SC and Im using the bypass that came with the kit.Silver round looking one.How much boost can I run with that bypass.I am venting it to the atmosphere.Thanks
I'm running 13psi w/o any troubles. Ive been told that anything over 15 and you should upgrade to a race bypass.
Dan
1995 Rio Red Cobra #2021
Dart 331,AFR185,D1SC,RPMII upper/lower
OLD
GT40X, E303, D1SC 13psi, 3 core intercooler, Magnaflow Catback, Hooker equal lengths, Mac Prochamber, 3.73, Auburn, Moser 31 splines, Pro-m75, MSD 6AL, TKO, Spec Stage III, Larocca Tuned
10psi 11:1 a/f= 464rwhp 431ft/lbs
11.9@123mph @13psi 1.9 60'
hp? tq?
Moderator of General Tech
I have heard 18 and over... with 15, I really think you would be fine with an inch and a half bypass.
The only thing I hated about that valve was it does leak, pretty good too. Mine stuck open once and I couldn't make more than 3 psi when it usually always made 17 psi. To fix the sticking part, I put heavy axle grease on the moving parts and that stopped the movement. Procharger sells the big race by-pass valve for $299 and it is very well worth it to buy that one.
R302, PT-74, TFS high ports stage III, F-303, 850 DP carburetor
710.0 RWHP & 834.4 RWTQ with 14 psi of boost....SO FAR!
My site:
http://users.rcn.com/davisab/
So far my bypass is working good even though I'm not making as much boost as most of you.. Only 10lbs here but I bought the Vortech Mondo bypass valve when I bought the blower so I just have to weld it up to the intercooler pipe leading to the MAF.. It was only like $220 and flows 600cfm at 10lbs (almost as much cfm as an A-trim haha;) )
Justin
93LX
With a few mods
380rwhp
390rwtq (dyno'd in 90 degrees with 100% humidity)
13.1@110 2.2 60 foot
GOT traction??
Bookmarks