-
Junior SCH Member
more beefs
1. The new aluminum intake pipe doesnt fit. I have to trim it by 1/4 inch. Right now it rubs the side of the blower and I cant get it flush with the outlet.
2. The heat hose supplied will not fit an aftermarket mass air meter. The hose necks down after the U. Now I have to order a different hose to fit my 76 C&L meter.
3. I have no clue where the stock belt tensioner goes. They left that out of the instructions.
I clocked the head and the hood now closes.
I feel this kit was rushed to market and no checks were made to see if everything was everything.
-
Junior SCH Member
Well, i got the discharge tube on by cutting it with a die grinder. And I found some old powerdyne flex hose to use on the mass air. All thats left is to put on the belts and tap the pan. I saved the scary part for last. I might have it running tomarrow if I find out where the tensioner goes. Later
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks