I just got a technical service bulletin in the mail from Procharger. it reads:
Inspect the high pressure FMU line (located between FMU and fuel rail) for hose specification. If hose is identified as 30R9 and/or fuel injection hose, hose is acceptable and no further action is required.
If hose is identified as 30R7 or cannot be identified, see remedy/ repair procedure below.
Basically remove and replace if you have a 30R7 line. contact ATI and they will send you out a new one.
Mine is one of the bad ones, and will be calling them for a replacement shortly. Just try ing to help out. Ken
Bookmarks