I just got my 90mm Lightning MAF, and I see it won't connect directly to the breather. It has a flat side "which I think it used to just connect to the air box", and my air cleaner should slip over a circle end. So my question is does anyone know who sells some sort of adapter to bolt it to the flat piece and has a round end off of it.
I will get a pic tomarrow if u need it, If you don't understand what I mean....
Thanks
Mark
Do a search on Corral.
I am sure that I read that you can get a tiolet adapter that has the same bolt pattern and its a perfect fit.
I believe the adapter was from Home Depot and its like $5.
What are you doing about the maf plug??
You do know that its different right??
1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph
Well I just noticed accuFab has a adapter for 41.99, and I baught the plug with the MAF.
I looked at a toilet adapter, and it was 3 inch pipe and 3 inch is a too big.
Mark
Mark
90 GT, With a Forged 383 Chevy, AFR 227 heads, BDS 6-71 Blower with 2 750 edelbrock carbs, all braided lines, TH-400 reverse manual valve body to back it up, and so much more.....
Want to see?????
Old Times with 302...
T-5: 12.671@110.52mph(1.951 60ft.)
Tremec TKO: 12.275@110.89(1.758 60ft)
Avatar Collection:
Posting Permissions
Reply With Quote
Bookmarks