Results 1 to 6 of 6

Thread: help w/ powerpipe install

  1. 05-20-2003, 05:50 PM #1
    FoMoCo1
    FoMoCo1 is offline
    Senior SCH Member FoMoCo1's Avatar
    Join Date
    Jan 2003
    Location
    Moore, Oklahoma
    Posts
    240

    help w/ powerpipe install

    i just recieved my morpheus powerpipe and i am attempting to install it, my question is am i supposed to trim the 90 degree rubber elbow to fit, cause theres no way its going to fit the way it sits, also is the actual pipe supposed to sit pretty close to the shock towers? any help and pictures would be appreciated, here are 2 pics ive shot of what i have so far
    Attached Images Attached Images
    89 GT TFS Heads Systemax Intake
    TFS 2 cam 3:55s Novi 2000 42#ers
    466hp / 409 torque ;)
    10.58 @ 121 mph
    Reply With Quote Reply With Quote
  2. 05-20-2003, 05:51 PM #2
    FoMoCo1
    FoMoCo1 is offline
    Senior SCH Member FoMoCo1's Avatar
    Join Date
    Jan 2003
    Location
    Moore, Oklahoma
    Posts
    240
    heres another pic
    Attached Images Attached Images
    89 GT TFS Heads Systemax Intake
    TFS 2 cam 3:55s Novi 2000 42#ers
    466hp / 409 torque ;)
    10.58 @ 121 mph
    Reply With Quote Reply With Quote
  3. 05-20-2003, 05:52 PM #3
    FoMoCo1
    FoMoCo1 is offline
    Senior SCH Member FoMoCo1's Avatar
    Join Date
    Jan 2003
    Location
    Moore, Oklahoma
    Posts
    240
    on those 2 pics i trimmed almost an inch off the rubber elbow on the blower side, havent messed with the powerpipe side yet
    89 GT TFS Heads Systemax Intake
    TFS 2 cam 3:55s Novi 2000 42#ers
    466hp / 409 torque ;)
    10.58 @ 121 mph
    Reply With Quote Reply With Quote
  4. 05-21-2003, 01:07 PM #4
    Saleen91
    Saleen91 is offline
    Senior SCH Member
    Join Date
    Dec 2002
    Location
    Tomball, TX
    Posts
    106
    FYI, I don't have a Morpheus pipe, but I did have to trim my 90^ rubber elbow to fit as well.
    TwEECer & Custom Chip Sales/Tuning - www.v8mustang.com
    Reply With Quote Reply With Quote
  5. 05-21-2003, 04:34 PM #5
    tonyv
    tonyv is offline
    SCH Member
    Join Date
    Oct 2002
    Posts
    91
    I removed alot from my rubber 90 elbo from both sides. Do a little at a time. Its a trial and error thing.
    1993 Mustang LX 5.0

    Engine:
    1993 Mustang LX 5.0

    306
    Paxton Novi2000 12psi
    Trickflow Track Heat Heads
    Trickflow Street Heat Intake
    Trickflow Stage 2 cam
    Scorpion 1:6 RR
    70mm BBK TB
    80mm Pro-M Shorty
    PowerPipe
    42# Injectors
    BBK 1 3/4 Long tube
    Flowmaster Catback
    Crane HI-6/PS2 Coil
    Every other Bolt on available

    518 RWHP 478 FT-LBS Torque
    Reply With Quote Reply With Quote
  6. 05-21-2003, 05:14 PM #6
    UNTCHBL
    UNTCHBL is offline
    SCH Moderator UNTCHBL's Avatar
    Join Date
    Nov 2002
    Location
    oklahoma city
    Posts
    1,890
    I have an aluminium inlet elbow before my pipe, and didn't cut it at all. I did however use a very large hammer, and made a pretty damn ugly hole in order to fit my anderson rip off pipe.

    Brandon
    90 strawberry coupe
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules