btfed,
the way your belt is routed, don't you think that the supercharger pulley isn't surrounded enough by the belt? And the way it goes from the alternator to crank, aren't you afraid of belt slippage?
btfed,
the way your belt is routed, don't you think that the supercharger pulley isn't surrounded enough by the belt? And the way it goes from the alternator to crank, aren't you afraid of belt slippage?
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
I used to have another extra idler pulley that made the belt contact the blower pulley much more. I had to remove it so the same belt that I had would fit the larger crank pulley. I plan on getting a longer belt today to fix this, But I got 11lbs all weekend and have not heard any slip at all. Gotta love goodyear gator back belts.
can you post the pic with the extra idler pulley? i am curious to see how you did it. thanks.
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
I didnt get a new belt today, I will post a pic tommorow of the extra idler.
your shop charges tax on labor??? Not allowed to do that here. Hmm
Blue I will remind you that the state of washington is in the top five for most taxed citizens in the country.:(
Everything is taxable in this state but perishable food.
Steve
1996 Acura Integra GSR
05 Pissat TDI
99 F250 PSD CC SB 6spd 4x4.....89LX Notch, 429Big Block(Rolling chassis).
is massachusetts one of the 5 most taxed? damn it's like everything is taxed here! damn gov. mofo's
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
Here is the extra idler i installed to prevent belt slip. Still only got 11lbs though.
is that attached to the SC or the bracket? Looks like the SC.
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
me is thinking of trying it on my car to make belt smaller, get rid of March bracket.
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
Yea it is bolted to the blower itself. The pulley is off a stock ford tensioner.
your not running smog either i take it? you have a pulley there? i like this idea if the belt isn't slipping.
Neil
Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil
Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.
HP: 488.3
TQ: 461.7 Tuned by FordChip.com
11.77 @ 119.9
Best 60ft-1.56
New project 1991 coupe
NEW TOY 1995 H/D Sportster
Posting Permissions
Reply With Quote
Bookmarks