anybody know. this car has full exhaust and rear coil overs.
also what backspacing on the rim so it doesn't stick out on the side of the car.
thanks.
anybody know. this car has full exhaust and rear coil overs.
also what backspacing on the rim so it doesn't stick out on the side of the car.
thanks.
87' GN- 3.8 SFI TURBO, A FEW MODS
90' GT- NOVI 1000 6 LBS, MILD 306 W/ NITROUS FOR THE LIITLE EXTRA KICK.
353HP/442RWTQ
383HP/475RWTQ W/60 SHOT
11.30 @119MPH
I have 275/60's on my 89 but i have dumps as well.
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
I have a buddy that runs 28X12.5 ET Drags on his stang with a 3" MAC catback with the tips, not dumped.
I would say that is the limit the car needed a little clearancing to fit them in there.
He runs the stock set up no coil overs and he uses south side machine lift bars.
The tires are mounted on stock ten holes, they bulge like crazy but the car hits 1.48 60fts so I would say it works not to bad.
1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph
I have 28x11.5 et streets with 3inch mac exhaust. I had to role my rear fenders, they where cutting my tires.
Bookmarks