-
Junior SCH Member
Intercooler not cooling????
I have the P600B with the 3 core intercooler and my intake temps are somewhere in the neighborhood of 20-30* cooler than the water temp according to my PMS. I even have the scoop on there, but the temps are still up around 140* to 150* while cruising. I'm pretty new to the SC thing, but I would have thought I'd be doing alot better than that with the intercooler. Anybody shed some light on this for me????
-
Senior SCH Member
fwiw, with no intercooling here, my act and ect run about the same temp after the intake manifold gets heat soaked.
-
Senior SCH Member
Air to air intercoolers are less efficient than air to water intercoolers. A/A is only getting cool when the car is moving/ambient temps flowing thru it. If it's a 103 outside that's what is flowing thru your intercooler. A/W with let's say small fuel cell,electric waterpump moving ice water flowing thru it, 50 degrees or less, will be a big difference in air temps/and power, and will work even at idle, with the ability to run more timing. IMHO only A/W intercoolers are worth the time and money, and are meant for all out competition racing. A/A on the street aren't really that efficient unless it's 40 degrees outside. When i had my P1SC i had a 3lb boost loss, and my air temps were like your're describing. The faster you spin the blower the less efficient it becomes, and the A/A is unable to do it's job. Sorry for the long post. Hope this sheds a little light.
Last edited by blueoval92; 09-28-2004 at 10:36 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks