Results 1 to 7 of 7

Thread: New owner checking in!

  1. #1
    Junior SCH Member
    Join Date
    Oct 2003
    Posts
    4

    New owner checking in!

    Finally...after almost 2 years I've got off my butt and am pushing to finish the GT.:D

    My old Kenne Bell combo with box stock 6037's, stock cam, GT40 lower, 36's, BBK EL's, Bassani X-pipe and a Pro-M 77mm went 12.0@119mph on a 17" BFG DR. I split the block after upping the boost and before any new times. :(

    New combo is a B50 based 327", forged Scat crank and H-beams, AFR 185's, Comp 284 HR (ground to 112* LC), Systemax intake, Mac LT's w/H and pro-dumps and a Novi 2k through a TKO and beefed 8.8" rear.

    I'm hoping to have everthing together and running by November. In fact, with a few small exceptions, I have all the hardware together now.

    Anyway...hope this board is a good resource!
    Later.
    Sean.
    '95 GT...12.0@119mph...now with AFR-185 headed, Novi-fed, B50 based, forged 327"...
    '87 Regal Limited, Turbo-T... bolt-ons and DOT's...getting quicker...

  2. #2
    SCH Moderator UNTCHBL's Avatar
    Join Date
    Nov 2002
    Location
    oklahoma city
    Posts
    1,890
    Sean, this board is an awsome resource. Let us know how it turns out.

    Brandon
    90 strawberry coupe

  3. #3
    Senior SCH Member lx-convertible's Avatar
    Join Date
    Oct 2002
    Location
    mass
    Posts
    473
    Welcome to the only Novi site that matters!
    Neil
    Engine: DSS Pro Bullet 306, Windsor Jr. heads, E303, 42lb inj., Cobra intake(fully ported lower)65mm TB, 80mm Mass Air, MSD 6BTM, MSD coil

    Power Adder: Novi 1K, Anderson PowerPipe, ASP 8 IN Crank. No PS, AC, SMOG.

    HP: 488.3
    TQ: 461.7 Tuned by FordChip.com

    11.77 @ 119.9
    Best 60ft-1.56
    New project 1991 coupe
    NEW TOY 1995 H/D Sportster

  4. #4
    SCH Moderator regattacoupe's Avatar
    Join Date
    Mar 2003
    Location
    Bucyrus oh
    Posts
    2,845
    Very nice combo! can't wait to hear about some track #'s.

    Brent
    89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:





    Although I am collecting parts for a 12.5:1 393 :D

  5. #5
    Junior SCH Member jonnyk's Avatar
    Join Date
    Jan 2003
    Posts
    29
    Welcome aboard! I'll be in the same boat as you in about 3-4 days. My new Novi 2k is on the way...
    Mods Pics
    13.18 @ 106.09 mph pre-blower
    Novi 2000 whistling under the hood

  6. #6
    Junior SCH Member
    Join Date
    Oct 2003
    Posts
    4
    My blower kit arrived today...this thing is HUGE!
    As mentioned, I had a Kenne Bell on the car before and I'm used to the "small" turbos that I run on my turbo Regal (TA49 now, with a TE63 on the shelf ;) ). This compressor is the size of a basketball.
    Sean.
    '95 GT...12.0@119mph...now with AFR-185 headed, Novi-fed, B50 based, forged 327"...
    '87 Regal Limited, Turbo-T... bolt-ons and DOT's...getting quicker...

  7. #7
    Senior SCH Member
    Join Date
    Mar 2003
    Posts
    142
    sheesh its about damn time sean!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •