Waterpump pulley

[allthrottle]

I'm running the stock waterpump pulley on my 92GT, I'm running the novi 1000 ( revised), the most clearence I have is about 1/8 of an inch b/t the waterpump pulley and the s/c belt, is this normal? If not what pulley do I need the run? I have heard of a few guys running the 93 Cobra waterpump pulley.

Thanks, Rusty

[Chuck]

Do you have A/C?

I recall someone else had this prob.

I think it was mhienjr check his photo post.

If you need a cobra water pump pulley I have a brand new one, PM me if you need it.

[allthrottle]

I have no a/c or smog, I have eliminator pullies in place, so the belt is following the factory rout.

[Chuck]

One of the revised guys will chime in here, I have the old single belt set up so Im not a good help.

[allthrottle]

Thanks anyway.

[sinner]

It's normal, the clearence is reduced even further with an 8" crank but it still wont touch.

[allthrottle]

how often do I need to check the tension? I check it about every 3 days or so.

Thanks, Rusty

[green93notch]

allthrottle - you took out the ac and smog pump? with the ac, cant you just get the delete kit on the new novi? i have the new novi set up too thats why im wondering.