belt length all accesories and f150?

**jordan83** · 11-04-2003, 02:31 PM

i need to know the belt length with all accesries and an f150 or the belt lenght that comes with the novi1k thanks

**Jason915** · 11-04-2003, 04:23 PM

The belt in the kit for the single belt novi will be too short for using the F-150 Pulley. Mine is 110.5 with full accessories but I have a slightley larger PS pump pulley and a slightley larger water pump pulley. I would try a 109.5 or so and go from there.

**root** · 11-04-2003, 04:30 PM

Each car can be different so just to be sure I would find an old belt, cut it, and wrap the pullies and measure to ensure you get the correct length..

Ian

**5150 LX** · 11-04-2003, 06:38 PM

jordon, Ian's correct. The best way is to trail fit a few. If you have a credit card, buy several & then return the ones you don't need & get a refund.

**jordan83** · 11-04-2003, 07:28 PM

well the sucky thing is i tried an 1105 and a 1098 i think it was which is the two right next to each other
and the 1105 maxes my tensioner out with and it is a little too loose the 1098 i think it is might be a 1089 but tis the next one lower and it is tight as hell to get on i had to pry it
but it should work thanks

**frank woodall** · 11-05-2003, 06:18 PM

My stock belt worked for me......

**jordan83** · 11-05-2003, 08:30 PM

did you have the same things as i do ?

**frank woodall** · 11-06-2003, 12:08 PM

Originally posted by jordan83
did you have the same things as i do ?

At the time , all the pulleys on my engine were stock and all accessories were on it . I used the belt that came with the charger and put on the F-150 pulley and it worked fine on my car.