Results 1 to 3 of 3

Thread: stock pulley size?

  1. #1
    Junior SCH Member
    Join Date
    Nov 2003
    Location
    FT. Worth, Texas
    Posts
    26

    stock pulley size?

    i recently purchased a Novi2k from a friend used and wanted to know how much boost will it be pullied for?this guy never put a boost gauge on and blew up his motor with in 50 miles...
    this set up is for a 95 gt.. will the stock injectors,255 fuel pump, and adjustable fuel pressure regulator.im will be running the stock non adjusatable fmu from paxton that came with the charger... i only want to run 8psi... will i be safe with this fuel set up?? again im new to the supercharger world..thsnkd for your help:D Lee
    white 95 gt
    308-cobra intake-roller rockers
    full exhaust-3.73's tremec 3550
    and Novi-2000 charger

  2. #2
    Senior SCH Member Chuck's Avatar
    Join Date
    Oct 2002
    Location
    Canada
    Posts
    614
    Not sure on the pulley size but the stock set up should make between 8-10#'s.

    I have heard some people saw 12 with the stock pulley's tho.

    Be conservative with the timing and If you can get rid of the FMU and use a larger injector like a 36 or 42 to allow room for further mods.
    1993 notch, 357W forged pistons 9.2-1 comp,Vortech S-trim 3" / 8" pullies, AFR 185 heads, Trick Flow R intake, Anderson B451 cam, PMAS 80mm, 06 PMS, 60# injectors, 3.55 gears and PA SC C4, Dual Walbro fuel system. Best ET 10.35 @ 135mph

  3. #3
    SCH Moderator UNTCHBL's Avatar
    Join Date
    Nov 2002
    Location
    oklahoma city
    Posts
    1,890
    I've seen as much as 15 with stock pullies, and a power pipe, along with a little larger discharge tube. On my stocker. Stock pully size is 3.5"
    90 strawberry coupe

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •