hey guys, did you read this article?>?? 610 RWTQ with 470 RWHP?? how did he get some much RWTQ?? any ideas?
hey guys, did you read this article?>?? 610 RWTQ with 470 RWHP?? how did he get some much RWTQ?? any ideas?
2003 Cobra
Mods to come:
-Magnaflow catback
-Magnaflow X pipe
-KnN 12" cone
-Gords Heat exchanger
-2.80 pulley w/tune
lates win - srt4 modded
no losses
I"m wondering the same damn thing. Thats makes turbo's not seem so cool all the sudden.
90 strawberry coupe
I don't know why everybody always rants and raves about how much rwhp somebody else has. Torque is what you feel, not horsepower. Better yet, lets all just compare time slips and see who got there first.
Doug
14-1 compression 402ci with a little nitrous
doesnt that sound ALOT though? think its in the cam??
2003 Cobra
Mods to come:
-Magnaflow catback
-Magnaflow X pipe
-KnN 12" cone
-Gords Heat exchanger
-2.80 pulley w/tune
lates win - srt4 modded
no losses
Carrol Shelby once said "Horsepower sells cars and Torque wins races" :D
I believe that to be true. When it's torque time there no replacement for displacement.
that also might be a typo. Like they got the figures switched? thats what i though when i read it.
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
I haven't read the article, but what was the rpm that the number was measured. My current combo makes about 600rwtq and 400rwhp at 4000rpm.
14-1 compression 402ci with a little nitrous
"470 RWHP and 610 RWTQ at only 3,400 on pump gas"
2003 Cobra
Mods to come:
-Magnaflow catback
-Magnaflow X pipe
-KnN 12" cone
-Gords Heat exchanger
-2.80 pulley w/tune
lates win - srt4 modded
no losses
is that N/A? holy axel twister batman!
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
here, TF TW heads, that flow 219 cfm intake 296 cfm exhaust .600, holley systemax II intake 17 psi on the vortech Strim, cam specs....230/.236 .544/.555, 112
this is on a 302 i take it? sounds like they got the rwhp and rwtq switched to be honest. An S-trim is not gonna make that kinda torque on a 302.
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
why I'm going big windsor in a nutshell
:)My current combo makes about 600rwtq and 400rwhp at 4000rpm.
90 strawberry coupe
yes sir! between doug and my friend who is putting a 393 together i was swayed as well.
89 Coupe with parts stacked inside of it and about 30#'s of dust on it with no end in sight. :weird:
Although I am collecting parts for a 12.5:1 393 :D
It'll happen for me too brent. until then it'll be some gt40p's or just 40's, cheap intake, and a cheap cam with some boost. :)
maybe about mid season.
90 strawberry coupe
306 with a mexican block cause his stock block blew up (literally)
well, I hate to be a disagree'r, but you are wrong, back in 98, my stock block S trim combo made low 500rwhp with 688rwtq(tq was at 4000rpms if I remember correctly) thru an AOD with a 3200 converter. its all in how you tune your car, I for one like to make as much torque as possible and let the HP fall where it does in a conservative manner. but thats just me.Originally Posted by regattacoupe
Spence
8.96/160
Bookmarks